QT450球墨法兰脱硫管道软连接

QT450球墨法兰脱硫管道软连接
Rubber soft joint of high pressure pump set with ductile flange

随着高压变频调速装置技术的日益成熟和可靠性的大幅提高,考虑到当前机组参与调峰和低负荷运行的现状,采用变频技术改造凝结水泵等耗电较大的辅机设备已经成为发电厂实现节能降耗、降低厂用电率的重要手段之一。基于此,新庄孜电厂于2011年初对两台机组的凝结水泵进行了变频改造,投入运行后,收到了很好的效果。

产品介绍

QT450球墨法兰脱硫管道软连接

QT450球墨法兰脱硫管道软连接

QT450球墨法兰脱硫管道软连接

QT450球墨法兰脱硫管道软连接

QT450球墨法兰“脱硫管道”橡胶软连接QT450-10球墨铸铁是碳以球形石墨的形态存在,其机械性能远胜于灰口铁而接近于钢,它具有优良的铸造、切削加工和耐磨性能,有一定的弹性,广泛用于制造曲轴、齿轮、活塞等高级铸件以及多种机械零件。

QT450球墨法兰橡胶接头缠绕好后,从缠绕架上取下来,把气胆放入球体内部,然后把整体放入模具中加热硫化,硫化好后拿出来要放一段时间,等模具放凉后把橡胶接头取出修边,因为模具都会有出气孔,所以多余的橡胶会从出气孔中排出,修饰好后就是橡胶接头球体了,然后把扣槽法兰安装上去就可以了,注意法兰安装这一部分是专业人士安装的,有一个技能在里边,不会的人尽量不要尝试,容易把法兰安反或是发橡胶水平面磨破。
After the rubber joint of QT450 ductile flange is wound, it is taken off from the winding frame, the air bladder is put into the ball, and then the whole body is put into the mold for heating and curing. After curing, it should be put out for a period of time. After the mold is cool, the rubber joint is taken out for trimming. Because there will be air holes in the mold, the excess rubber will be discharged from the air outlet. After the modification, the rubber joint will be the rubber joint The ball, and then the groove flange can be installed, pay attention to flange installation this part is professional installation, there is a skill in the inside, will not try as far as possible, easy to reverse the flange or rubber horizontal surface wear.

QT450球墨法兰脱硫管道软连接

版权所有:http://www.ktrjt.com 转载请注明出处
021-3366 6667 发送短信